76
16.4
F4
Surface
Enables the procedure to calculate field surface by driving along its perimeter.
1
1
In the guidance screen, press
Func.
2
Press
F4
to start the surface calculation procedure (function list disappears).
The following message will appear:
Field edge side selection
prompting the operator to select which side of the machine to use as a
reference to define the field perimeter.
3
Press
F3
(
Left
) or
F4
(
Right
): a white line will be displayed to draw the field perimeter as the tractor moves (Fig. 207).
4
Drive along the perimeter of the field or of the surface you wish to measure.
When you get close to the calculation starting point, press
Func.
again
5
Press
F6
to complete the surface calculation procedure (Fig. 208). The computer will connect starting and end points and will calculate the
surface.
2
Fig. 206
EDGE
OF THE FIELD
3b
3a
Fig. 207
5
4
Fig. 208
The field external edge (white line) follows the trajectory of the
most external open section valve.
When all section valves are closed, the field edge starts from the
boom center.
FIELD EDGE ON THE LEFT SIDE
FIELD EDGE ON THE RIGHT SIDE
Fig. 209
Fig. 210
• Pause function in area calculation
This function can be used when changes in direction or maneuvers are necessary while the perimeter is being marked,
but they do not have to be included (for example close to an obstacle or to the field end).
- Press
Func
and then
F4
: the field edge will no longer be drawn (Fig. 211);
- Press
Func
again, then
F4
to restore perimeter marking (Fig. 213);
- Continue the procedure described above (point
4
).
Fig. 211
MANEUVER
Fig. 212
Fig. 213
Fig. 214
"JOB FUNCTIONS" - F4 SURFACE
