77
Exit the function
or data change
Confirm access
or data change
Scroll
(LEFT /
RIGHT)
Delete
selected
character
Data
decrease
of data
Scroll
(UP /
DOWN)
Enter
selected
character
Par.
"JOB FUNCTIONS" - F5 RESUME FROM PAUSE
16.5
F5
Resume from pause
Guidance indications to return to job breaking point
,
previously saved with function “F1 Pause” (par. 16.3.1).
1
2
A
B
C
Fig. 215
1
In the guidance screen, press Func.
2
Press
F5
to obtain guidance information and enable the return to job breaking point
procedure.
The fuchsia line
B
in Fig. 215 (which connects the position of the machine to that of the breaking point) shows the direction to be
followed to reach the point marked as
A
. The display shows in fuchsia the distance between your position and the breaking point
(
C
in Fig. 215).
3
Continue driving and make sure that the distance is decreasing: you are reaching the breaking point.
When you are close to it, you can see it on the display.
4
Once you have reached the position, the value of the distance reaches "zero” (Fig. 216): press
OK
or
ESC
to exit the procedure.
4a
4b
Fig. 216
OK
the monitor goes back to displaying
guidance information for the spraying and
the symbol is erased.
ESC
the monitor goes back to
displaying guidance information for the
spraying but the symbol is saved.
16.6
F6
Align
Moves the closest reference track, re-aligning it to the position of the machine.
This function is useful when you need to re-align the machine, whilst continuing to drive in the same
direction (for example, for corn, sugar cane).
1
2
Fig. 217
1
In the guidance screen, press Func.
2
Press
F6
to align with the current position.
The closest reference track (
A
in Fig. 217) moves and becomes aligned with the center of the tractor: all other reference tracks move
accordingly. After the alignment, the deviation value
>2.0>
(
B
) becomes
0.0
.
Fig. 218
Once this function has been
used, it is not possible to restore
the original reference track.
B
B
A
A
"JOB FUNCTIONS” - F6 ALIGN
