11
6.3
Connecting the sensors
Fit the connectors to the services following the markings given in the general system installation
diagram in your possession (Par. 4.1 - Recommended system configuration).
The cables are marked to indicate the service to which they connect.
Table 4 gives all necessary instructions for connecting the cables to the services.
Item
Main connection
US1÷US2
Ultrasonic sensors
S
Speed sensor
1÷2
Section valves
Use ARAG sensors: use of unsuitable sensors or sensors not provided by ARAG
automatically voids the warranty.
ARAG is not liable for damage to the equipment, persons, animals or things caused
by failure to observe the above instructions.
The product comes with speed sensor connection instructions.
Connect ultrasonic sensor connectors: ensure they are correctly in place and then completely
tighten ring nut
A
(Fig. 5c).
Fig. 5a
Fig. 5b
Fig. 5c
Tab. 4
