20
Used to scroll
data or edit values
Quits function or
changes to data
Confirms access or
change to data
10
USE
10.1
Preliminary setup before application
Before starting a treatment, a number of settings are required to ensure that the treatment is implemented
correctly. Once the data have been entered, treatment can be started.
When
Setting
Advanced
menu
Dedicated
key
Par.
FIRST START-UP
Wheel constant (speed sensor ENABLED)
•
9.7
Sensors / sections distance
•
9.8
BEFORE EACH
APPLICATION
Set speed (speed sensor DISABLED)
•
10.2
Row distance (speed sensor ENABLED)
•
10.3
Sensitivity
•
10.4
Spraying data reset (optional)
•
10.7
Tab. 10
10.2
Machine speed (simulated)
S 5.
km/h A
3 Trs.
Ok
Esc
ULTRASONIC CONTROLLER
Auto
2
2
1/3
Set machine speed
Speed simulation allows spraying even if no speed sensors are
fitted on the wheels.
Simulation is set to 5 km/h but this setting can be changed.
Only if speed sensor is DISABLED (Par. 9.6):
1
) Press to edit simulated speed.
2
) Edit the value.
3
) Confirm setting.
10.3
Row distance
Ok
Esc
ULTRASONIC CONTROLLER
Auto
2
2
1/3
Row distance
6.0
m
3 sec.
Set the distance between rows to be sprayed
(
A
, Fig. 10).
Only if speed sensor is ENABLED (Par. 9.6):
1
) Press and hold for 3 seconds to change row distance.
2
) Edit the value.
3
) Confirm setting.
Fig. 10
