8
4.3
Mounting the bracket
The monitor must be mounted on a bracket installed at the desired location (the previous paragraph
shows the bracket drilling template). The bracket must be extracted from its seat on the monitor (
A
,
Fig. 1) and installed using the provided bolts (
B
).
Make sure the bracket is securely mounted, fit the monitor or control unit to it, and push it in until
it locks in place (
C
).
A
B
C
Ok
Esc
ULTR
ASO
NIC C
ONTR
OLLE
R
Auto
Ok
Esc
ULTR
ASO
NIC C
ONTR
OLLE
R
Auto
4.4
Location of the control unit
The control unit must be installed with the special brackets supplied and mounted to the unit, posi-
tioning it as shown in the manual provided with it.
MAKE SURE TO FOLLOW ALL THE SAFETY INSTRUCTIONS GIVEN IN THE CONTROL
UNIT’S MANUAL.
5
CONNECTING THE MONITOR TO THE MACHINE
5.1
General precautions for cable runs
• Securing the cables:
- Secure the cables so that they do not interfere with moving parts;
- Route the cables in such a way that twisting and tractor movements cannot damage or break them.
• Routing the cables to protect against water infiltrations:
- Branches in the cable runs must ALWAYS be oriented downwards (Fig. 2b).
Ok
Esc
ULTR
ASO
NIC C
ONTR
OLLE
R
Auto
Ok
Esc
ULTR
ASO
NIC C
ONTR
OLLE
R
Auto
• Fitting the cables to the connection points:
- Do not force the connectors by pushing too hard or bending them: the contacts can be damaged
and monitor operation compromised.
• Use ONLY the cables and accessories listed in the catalogue; these have the correct
specifications for their intended application.
Fig. 1
Fig. 2a
Fig. 2b
