21
Used to scroll
data or edit values
Quits function or
changes to data
Confirms access or
change to data
10.4
Sensibility
Ok
Esc
ULTRASONIC CONTROLLER
Auto
2
2
3
1
Sensibility
2
cm
Set sensibility on distance
A
.
Set value allows you to advance boom opening and delay its
closing when tractor is close to the plant to be sprayed (Fig. 11).
1
) Press to edit sensibility.
2
) Edit the value.
3
) Confirm setting.
10.5
Automatic operation
Ok
Esc
ULTRASONIC CONTROLLER
Auto
3
4
4
Trs.
Trs.
Drive to where the field begins.
Carry out any necessary settings prior to spraying.
Select automatic mode
A
.
Enable required booms.
Drive to where the row starts and switch the pump on.
Start spraying.
When this symbol is on, boom is
ACTIVE; press and hold keys (4) to open
the corresponding boom.
If the symbol comes on the display it
means that boom is spraying.
Disable AUTOMATIC mode
(
A
)
when driving outside the areas to be sprayed.
10.6
Manual operation
Ok
Esc
ULTRASONIC CONTROLLER
Auto
3
4
4
M
Trs.
Trs.
Drive to where the field begins.
Select manual mode
M
.
Drive to where the row starts and switch the pump on.
Start spraying: open and close booms when required.
This parameter is used when it is difficult
to detect the beginning and end of a row
when plants have a few leaves.
Fig. 11
