POH / AFM
AQUILA AT01-100C
Section 4
NORMAL PROCEDURES
Document Nr.:
Issue:
Supersedes Issue:
Date:
Page:
FM-AT01-1010-103
A.08
A.06 (01.06.2018)
25.05.2020
4 - 13
4.5.3
Before Taxiing
CAUTION
Warm up the engine for approx. 2 min at 800 RPM and then at 1000 RPM until the Oil
Temperature reaches a temperature of at least 122°F (50°C)
1.
Avionics
switch
ON
2.
Avionics and flight instruments
SET
The GARMIN G500 / G500 TXi has an integrated sensor that automatically adjusts the
brightness of the display.
It is also possible to adjust the brightness of the display manually. Using the large knob of the
G500 MFD to change to the AUX page. Use the small knob to adjust the brightness. When
finished press the ENT button to save the changes. To manually adjust the brightness of a
G500 TXi use the MFD touch-
screen to change into menu “Home” than “System” and into
“Backlight”.
3.
Annunciator panel
PRESS
TEST
and check that the
ALT1, ALT2, ENG
(YELLOW) and
ENG
(RED) warning lights illuminate
4.
Engine instruments
CHECK
NOTE
Oil can be brought up to temperature during taxiing.
5.
Voltmeter
CHECK if GREEN
6.
Ammeter
CHECK if GREEN
7.
Trim switch and indication
functional CHECK
8.
Flap switch and indication
functional CHECK, afterwards UP
9.
P/S Heat
switch (if installed)
ON ,
P/S HEAT
warning light goes off
10.
P/S Heat
switch (if installed)
OFF,
P/S HEAT
warning light goes on
11.
all switches
AS REQUIRED
4.5.4
Taxiing
1.
Parking Brake
RELEASE
2.
Brakes
CHECK
3.
Nose Wheel Steering
CHECK (function, free movement)
4.
Flight instruments and Avionics
CHECK
CAUTION
Do not operate the engine at high RPM when taxiing to prevent damage to the propeller
through stones or other foreign objects.
