POH / AFM
AQUILA AT01-100C
Section 4
NORMAL PROCEDURES
Document Nr.:
Issue:
Supersedes Issue:
Date:
Page:
FM-AT01-1010-103
A.08
A.06 (01.06.2018)
25.05.2020
4 - 8
g) Propeller blades
CHECK for cracks and other damage
7.
Nose landing gear
a) Nose gear strut
Visual inspection
b) Wheel fairing
Visual inspection
CAUTION
Both parts of the 2 piece nose wheel fairing must always be installed on the aircraft
c) Tire pressure and slip marking
CHECK
d) Tire, wheel
Visual inspection
e) Shock absorber
uni
t
Visual inspection
f) Chocks and tow bar
REMOVE
8.
Left wing
a) Entire wing surface (upper and under side) Visual inspection
b) Fuel vent
CHECK if clear
c)
BAT
switch
ON
d) Stall warning
press to upper detent, warning
tone is audible
e)
BAT
switch
OFF
f) Pitot / Static tube
REMOVE cover,
CHECK if all openings are clear
g) Wing tip, NAV lights and ACL
Visual inspection
h) Aileron and inspection window
Visual inspection
i) Cooler cover (if installed)
Visual inspection
j) Fuel level
CHECK with dipstick and verify
with the indicated fuel level on the
fuel gauge
k) Fuel tank filler cap
CHECK if closed
l) Flap
Visual inspection
m) Wing tie-down
DISCONNECT