POH / AFM
AQUILA AT01-100C
SECTION 3
EMERGENCY PROCEDURES
Document Nr.:
Issue:
Supersedes Issue:
Date:
Page:
FM-AT01-1010-103
A.08
A.06 (01.06.2018)
25.05.2020
3 - 15
3.12.2 Trim Actuator Runaway
1.
Control Column
HOLD in position
2.
Trim Actuator
circuit breaker
PULL
3.
Trim switch
CHECK if pressed or jammed
If the problem is obvious, and can be solved:
4.
Trim Actuator
circuit breaker
(see 3.1.1)
RESET
NOTE
Approx. 8 seconds are required to trim from full nose-down to full nose-up or vice versa.
If the problem cannot be solved:
5.
Land at the nearest airfield.
3.13 AVIONICS MALFUNCTIONS
3.13.1 Complete Avionics Failure
1.
Avionics
switch
SWITCH OFF then ON, approx. 20 sec.
interval
If the switch trips to the OFF position:
2.
Land at the nearest suitable airfield.
3.13.2 Receive Mode Failure of COM-Equipment
1.
Push-to-Talk (PPT) switch
CHECK pilot’s and co-pilot’s
PTT-switches are not pressed or
jammed (also check transceiver
display). CHECK connectors.
2.
Head-set
Momentarily switch off SQUELCH.
If no noise is audible:
CHECK head-set connectors.
3.13.3 Transmit Mode Failure of COM-Equipment
1.
Transmit-Signal TX
CHECK if displayed while
transmitting.
2.
Selected frequency
CHECK, if correct
3.
Microphone
CHECK, if necessary replace
head-set.
If the problem cannot be eliminated, set transponder to 7600 (radio failure) as required.