Aquatronica evolution ACQ110 Instruction Manual Download Page 13

Page: 13 / 60

13 - 60

IsACQ110C-0 (ENG) Rev.230708-0

Connection diagrams

Switch for enabling emergency procedure:

AUT:

operation as per set programs;

MAN:

manual emergency operation, all

outputs powered.

ATTENTION:

if the switch is on “MAN”, no

set program on the controller will work on the

sockets.

Connectors for connecting temperature or

level sensors.

Connector for connecting the previous Aquat

ronica controller (ACQ001).

BUS sockets for connection of:

AQUATRONICA controller

•

Original AQUATRONICA accessories

•

WARNING

Connect only original AQUATRONICA devices to BUS sockets.

BUS connectors do not operate with USB stands, so do not connect any commercial USB device to these

sockets to prevent irreparable damage.

AQUATRONICA declines all responsibility due to non-compliance with this provision.

AUT

MAN

Summary of Contents for evolution ACQ110





























































Search results

Summary of Contents for evolution ACQ110

Reviews:

Related manuals for evolution ACQ110

Brands by name

Popular brands

Aquatronica evolution ACQ110, Instruction Manual

Search results

Summary of Contents for evolution ACQ110

Reviews:

Related manuals for evolution ACQ110

Brands by name

Popular brands