45 - 60
IsACQ110C-0 (ENG) Rev.230708-0
(Fig. 58)
Temperature
Insert
Programs (Fig. 58)
Allows the user to make programs in relation to the tempe
-
rature.
To insert a program, proceed as follows:
Main screen
Main Menu
Temperature
Pro-
grams.
•
Select the “Insert”
option with keys
and press “En-
ter”.
To set up a program, the following must be established:
- A reference value
, defined as the temperature for the tank,
which the system will aim to maintain by enabling/disabling
any heaters or coolers.
- A
∆
Max value
, defined as the tolerance that must be
observed with respect to values higher than the reference
value.
For example: If the reference is set to 27°C and the
∆
Max
is 0.5°C, the system will be enabled at values higher than
27.5°C (see chart).
- A
∆
Min value
, defined as the tolerance that must be ob
-
served with respect to values lower than the reference value.
For example: If the reference is set to 27°C and the
∆
Min
is 0.3°C, the system will be enabled at values lower than
26.7°C (see chart).
NOTE:
∆
Min and
∆
Max can be the same or different.
27°C
26.7°C
27.5°C
Temperature
Time
Ref.+
∆
Max
Key to symbols
Values for which the system is enabled
∆
Max=0.5
∆
Min=0.3
Ref.
Ref.-
∆
Min
Temperature Menu
