29 - 60
IsACQ110C-0 (ENG) Rev.230708-0
Power Unit Menu
Manual Commands (Single Control)
Allows the user to manually modify the state of the outputs
being worked on independently from their set programs
(E.g. Fig. 26).
The “hand” symbol above the selected output indicates that
it is forced manually and
OFF
.
The “hand” symbol above the selected output with the
corresponding letter highlighted indicates that it is forced
manually and
ON
.
To select this function, proceed as follows:
Main screen
Main Menu
Power Unit
Manual Com-
mands.
•
Select the desired output with keys
while with keys
modify its state. When finished, press
“Enter”.
Manual Commands (All OFF) (Fig. 27)
This manually deactivates all the outputs present on the power
unit simultaneously.
To use this function, proceed as follows:
Main screen
Main Menu
Power Unit
Manual Com-
mands.
•
Select “All OFF”
with the keys
and press “Enter”.
Manual Commands (All ON) (Fig. 28)
This manually activates all the outputs present on the power
unit simultaneously.
To use this function, proceed as follows:
Main screen
Main Menu
Power Unit
Manual Com-
mands.
•
Select “All ON”
with the keys
and press “Enter”.
Manual Commands (Restore All) (Fig. 29)
This function simultaneously eliminates all the manual
commands which were previously set on the power unit.
All outputs will automatically begin to function according to
their set programs.
To use this function, proceed as follows:
Main screen
Main Menu
Power Unit
Manual Com-
mands.
•
Select “Restore All”
with the keys
and press “En-
ter”.
(Fig. 26)
Manual Commands
(Fig. 27)
Manual Commands
(Fig. 28)
Manual Commands
Single Control
PU01
A
B
C
D E F
All OFF
PU01 A B C D E F
All ON
PU01
A B C D E F
(Fig. 29)
Manual Commands
Restore All
PU01 A B C D E F
