Aquanami JETANGLER, Operator'S Manual

Page: 59 / 114

- 57 -
CAUTION: Starting the engine or operating the watercraft in shallow water can draw
sand, pebbles, or rocks through the jet pump, which might damage the impeller or
other pump components.
Boarding in Deep Water
Swim to the side or front of the watercraft. Put your hands on the board and pull
yourself up then get on. Once aboard, take the appropriate riding position.
Boarding in deep water is very difficult. Taking kayaking lessons and training is helpful
and necessary. Many universities, colleges, kayak tutor schools, kayak rental places
offer kayak lessons. You could find them on line.
Starting Engine
Before unloading the watercraft on to water, it can be started for about 20 seconds to
verify proper operation.
NOTICES:
Ensure there is at least 50 cm (1.5 ft) of water when you are onboard prior to starting
the engine. Otherwise damage to the impeller or other jet pump components might
occur. Do not accelerate abruptly.
1) Attach the tether cord clip to your PFD or to the wrist (wrist strap required).
2) Firmly grip the handle with your left hand and place both feet on the foot braces.
3) Install the tether cord on the engine cut-off switch.