- 101 -
TROUBLESHOOTING GUIDELINES
Use this section to check for the possible cause of simple troubles you may have with
your watercraft. You may solve some of the problems rather quickly, but may need
help from a skilled mechanical technician. In such cases, refer to an authorized
Aquanami Dealer for servicing. If a procedure for replacement or repair is not
described in the Guide, have an Authorized Aquanami Dealer perform necessary
service.
Trouble Shooting Guidelines
TROUBLE
POSSIBLE CAUSE
REMEDY
Engine does not
turn over
main switch is off
turn on main switch
Lanyard is not in place
put Lanyard on post
burn fuse
check and replace
battery runs down, bad terminal
connection
charge battery and tighten terminal
fault start motor
refer to a Aquanami dealer
bad electric connectors of start
motor cables
refer to a Aquanami dealer
seized jet pump
refer to a Aquanami dealer
water flooded and seized engine
refer to a Aquanami dealer
faulty stop button, faulty Lanyard
post
refer to a Aquanami dealer
bad start switch
refer to a Aquanami dealer
bad relay switch
refer to a Aquanami dealer
Engine turns
slowly, but does
not start
weaken or discharged battery
replace battery
bad battery cable connection
tighten
worn start motor
refer to a Aquanami dealer
Engine turns
normally, but does
not start
empty fuel
fill
stale or contaminated fuel tank
clean and refill
watered/contaminated carburetor
drain carburetor, and drain fuel
retainer
fouled or defective spark plug
replace
Summary of Contents for JETANGLER
