Aquanami JETANGLER, Operator'S Manual

Page: 88 / 114

- 86 -
8. The user should not start water flow into flush water connector until the engine is
started; adding that running water into the flush system without the engine first
running will result in engine damage that will not be covered under warranty.
Anticorrosion Treatment
To prevent corrosion, spray a corrosion inhibitor (salt water resistant) over metallic
components in engine compartment. Apply dielectric grease (salt water resistant) on
battery posts and cable connectors. Spray water repellent on fiber glass surface in
bilge to prevent mildew and marine organisms according to the Maintenance Chart.