Visage™ Digital Installation Guide 17
ADJUSTABLE HEIGHT HEADS
Ensure the finished wall surface is even, prepare pipework from the Quartz Smart Valve™ to
the required position for the hose outlet using a Ø15mm pipe. Slide the wall spacer down the
projecting pipe until flush with the finished wall surface.
1
Installation videos are available on our website www.aqualisa.co.uk/installation-videos
or alternatively, scan the QR code on the reverse of this guide.
Slide the 15mm gripper ring down the projecting pipe until flush
with the wall spacer fitting.
2
Trim the projecting pipe to a length of 15-22mm, measured from the face of the gripper ring, using
a suitable cutter. If a hacksaw is used, the pipe end must be carefully de-burred and chamfered.
3
Clean and lubricate the pipe using a suitable (silicone based) lubricant.
4
Remove the locking screw, rotate the chrome outlet assembly
and remove the outlet from the wall mounting plate by carefully
levering with a flat bladed screwdriver.
5
Ensuring the locking screw hole is positioned at the bottom,
place the wall outlet mounting plate onto the pipe assembly and
mark and prepare the fixing points, using the fixings provided
(if suitable).
6
Secure the wall mounting plate to the wall using the screws
provided (if suitable).
7
