13
2
Slide the 15mm gripper ring down the projecting pipe flush with the wall spacer
fitting.
3
Trim the projecting pipe to a length of 15-20mm, measured from the front face of the grip ring, using
a rotary type cutter. If a hacksaw is used, the pipe end must be carefully de-burred and chamfered.
4
Clean and lubricate the pipe using a suitable (silicone based) lubricant.
5
Remove the locking screw, rotate the chrome outlet assembly and remove the outlet
from the wall mounting plate.
6
Place the wall outlet mounting plate onto the pipe assembly and mark and prepare
the fixing points, using the fixings provided, if suitable.
7
Secure the wall mounting plate to the wall using the screws provided, if suitable.
8
Place the wall outlet onto the mounting plate, with the hose connection in the
5 o’clock position and rotate clockwise until a stop is reached.
9
Refit the locking screw taking care not to overtighten.
Dream installation guide:Dolphin install Guide 18/1/11 09:52 Page 13
