9
!
In addition to the guide below it is essential that the written instructions overleaf are read and
understood and that you have all the necessary components (shown on page 8) before commencing
installation. Failure to install the product in accordance with these instructions may adversely affect
the warranty terms and conditions. Do not undertake any part of this installation unless you are
competent to do so. Prior to starting ensure that you are familiar with the necessary plumbing
regulations required to install the product correctly and safely.
Dream concealed is supplied with universal fixings.
1
If installing the product built in to a solid wall, chase out a suitable recess in the wall to receive the valve
and pipe work. If installing the valve in a concealed panel mounted situation, in most cases it will be
necessary to first install a suitable sound fixing in the cavity area before fixing the valve. A hole of Ø130mm
is required to install the valve and gain access to inlet and outlet connectors.
The valve needs to be mounted to the depth shown at the following centres.
The distance between the 15mm inlet centre pipe centres is 150mm as shown.
2
Mark the position for the four fixing points as outlined above.
Dream concealed valve installation
4
Carefully remove the on/off knob from the valve assembly and set aside.
3
Carefully remove the valve from its packaging and retain the mortar guard for later use.
65mm
150mm
Supply pipes hot on
left, cold on right
65mm
100mm max.
to finished/
tiled wall
surface
60mm
min. from
back face
of valve to
finished/
tiled wall
surface
(10mm
allowance
for tiles)
Dream installation guide:Dolphin install Guide 18/1/11 09:51 Page 9
