Aquacontrol SL3 Deluxe Wi-Fi, Manual

Page: 41 / 177

41
• Regulation slope
The numeric value gives the proportional range and thus the regulation slope. Usual
values are
– 1.00/1.00 depending on the direction of dosage.
Meaning: With a p range of 1.00, the dosing pump operates at maximum performance
with a deviation of the measured actual value compared to the setpoint of Δ 1. When
the actual value approaches the setpoint in the p range, the dosing performance is
reduced proportionally. Thus, for a deviation of e.g. Δ 0.5, the pump only operates with
50% of the maximum performance.
4.4 Minimum alarm (
↓
): [6.80]
Minimum alarm value which, when undercut, triggers an alarm.
4.5 Maximum alarm (
↑
): [7.60]
Maximum alarm value which, when exceeded, triggers an alarm.
5 Disinfection with active oxygen
In addition to mechanical water treatment (filter / pool hydraulics),
it is essential to maintain hygiene parameters such as pH value and the content
of disinfectant are essential.
Active oxygen should preferably be used in pools with a lower load. The system
technology was therefore dimensioned larger by the expert because this
alternative product has a weaker effect compared to chlorine.
Water temperatures above 28° C should be avoided. The higher the water
temperature, the better algae, viruses and bacteria can multiply.
If the pool water no longer meets the requirements despite regular addition of
active oxygen, the pool can be disinfected again with targeted high chlorination.
5.1 Oxygen dosage [Off]
The amount of active oxygen required is added to the pool daily. The dosage can
be activated or deactivated in this menu item.
5.2 Dosage Start Time [9.00]
In this menu item, the time for the daily addition can be changed.