Aqua OC-105B, User Manual, Page: 5 / 17

SG-B SERIES STEAM GENERATOR
E005-28-10-12 5
(2) parts instruction (chart 3 )
No. Part description
1 Water inlet valve Automatically controls the water flow (maximum pressure 2bar)
2 Drain valve Controlled by controller .turn on or turn off to drain water
3 Power entry The route of power wire
4 Control cable entry The route of control cable
5 Stainless steel tank boiler
6 Insulation material Reduce the loss of the boiler heat
7 Water lever probe Detect the water level
8 Steam outlet Steam outlet
9 Pressure relief valve Operates if the pressure in the boiler exceeds 0.12MPa
10 Overheat switch Boil dry protector operates at 110
℃
11 Main circuit board Control center
12 Accessorial circuit board Connect and control the heat element
13 terminal Connection for power supply
14 Earth wire plug Connection for earth wire
15 Descaling liquid inlet Descaling liquid inlet (1/2 inch)
16 Heat element Heat element
Parts description of OC-B controller.
(1)
、
OC-B controller(Fig-5
）
2
1
3
5
6
4
7
16
17
9
8
15
10
14
11
13
12
(Fig-5)
(2)
、
Part description(Chart 4)
No. Part description
1 Push to operate
2 Push to operate
3 Dual function button push to select steam on demand mode or to drain
the generator manually when not steaming.
4 Dual function button used when steaming to set the time/temperature
and when not steaming to begin the automatic descaling