STANDARD POWER SUPPLIES
(A78002)
USING AN EXTERNAL TIMER WITH
THE POWER SUPPLY
There are situations where you might want to override the
power supply’s run time. Perhaps you’d like your cleaner to run
while you’re on vacation, or early in the moring or late in the
evening. In any case, this cleaner’s power supply is capable
of connecting to any *external timer. It is recommended to
do the following (in order) to run this feature:
1.
Connect the external timer to your GFCI outlet,
2.
Connect the power supply to the external timer.
3.
Power Supply should automatically turn
ON
4.
After the cleaner starts, configure the timer as needed.
POWER SUPPLY OPERATION
The pool cleaner will start working as soon as the power supply is plugged
into the wall outlet and the floating cable is plugged into the power supply
socket. The indicator light on the power supply lights up to confirm that the
cleaner is working.
• To turn the power supply OFF while the cleaner is running it’s cycle, press and
release the power ON/OFF button. The indicator light will turn off.
• Once the cleaner has finished its cleaning cycle, it will enter a “stand-by” mode
where the indicator light will start blinking. To restart the cleaning cycle press
and release the ON/OFF button. Should you wish to completely turn the
power supply off, unplug the power cord from the wall outlet, then unplug the
floating cable from the power supply.
To exit this mode:
1. Press the ON / OFF button to turn
OFF
the cleaner.
2. Disconnect the Power Supply from the external timer.
3. Disconnect the external timer from the GFCI outlet.
4. Plug the power supply back into your GFCI outlet.
*Please note that the external timer is not included with the
cleaner and must be purchased separately.