QUICK START
Use only as much cable as you need. Limit the
amount of cable to reach the furthest wall.
This will help prevent cable tangling.
Place the cleaner in your pool in the shallow end and turn
upside down to remove any air bubbles. Let the cleaner
fall to the bottom of the pool right side up.
Plug power supply into a GFCI outlet (Ground Fault Circuit Interrupter)
(Power Supply must be 12 ft. from the pool’s edge)
Your cleaning should now be moving along the
bottom of the pool!
*Please see
Page 5 for
power supply
variations.
A
B
1
4
5
3
2
Straighten out the floating cable and plug the cleaner into the
power supply. DO NOT plug the power supply’s power cord
into the wall outlet at this point.
