15
4
Step 5 – Start-Up
1. Check system to verify all components are correctly installed
2. Open inlet valve.
3. Check system thoroughly for leaks. If any are found, shut off inlet and correct the issue.
4. Open faucet to flush carbon fines & sanitization solution. After allowing the system to run for 20 minutes turn
off the faucet
5. System is ready to use
WARNING! Do not drink water produced by the system until the start-up procedure has been
followed completely!
6. Attach locking clips to each elbow
fitting. Clips should slide in behind
collet on the fittings.
