Copyright © 2014 Aqua Creek Products All Rights Reserved
Revised 9/8/14
V.1
Patriot-AT1 Transportation & Use
1.
Roll Patriot-AT1 Lift to designated position on the deck. Install fixing-bolt (when required).
Stand behind the lift to tilt it back and down using the handle.
(SEE Figure A)
2.
Roll the lift forward until it comes to the end and the pins engage with the slots.
3
.
Rotate the lift forward and down until it rests flat on the deck. Turn the handle of the brake-
foot clockwise until the brake-foot is firmly in contact with the deck. The lift is now ready to
use.
FIGURE A
STAND
HERE
POOL WALL
1] TILT LIFT BACK
AND DOWN
TRANSPORT POSITION
HANDLE
BRAKE FOOT IS UP
2] ROLL LIFT FORWARD
TO ENGAGE PINS IN SLOT
TILT AND ROLL FORWARD
FIXING-ANCHOR
FIXING-BOLT
INSTALLED
3] ROTATE LIFT FORWARD ONTO
DECK. LOWER BRAKE FOOT.
READY TO USE
BRAKE FOOT IS DOWN
A
CLOSE-UP DETAIL: PIN IN SLOT
PIN
SLOT
8
