V.1
Copyright © 2014 Aqua Creek Products All Rights Reserved
Revised 9/8/14
V.1
Returning The Patriot-AT1 To Transport Mode
1.
Tilt the lift back and down until the lower wheels are at the cart level.
2.
Roll the lift back and onto the cart. Roll all the way back to the end of the guide frames (see
close-up detail).
3.
Pivot t
he lift forward and down until it is resting on the cart. Rotate the brake-foot handle
counter-clockwise and raise it off the deck. REMOVE THE FIXING BOLT (if applicable). The lift is
now ready to move
FIGURE B
STAND
HERE
POOL WALL
REMOVE
FIXING-BOLT
TO TRANSPORT
(WHERE APPLICABLE)
1] ROTATE LIFT BACK UNTIL LOW
WHEELS ARE @ CART LEVEL.
BEFORE TILT AND ROLL
HANDLE
BRAKE FOOT IS DOWN
FIXING ANCHOR (IN DECK)
2] ROLL LIFT BACK TO
END OF GUIDE FRAMES.
TILT AND ROLL ONTO CART
3] TILT LIFT FORWARD ONTO
CART FOR TRANSPORT.
TRANSPORT POSITION
BRAKE FOOT IS UP
REMOVE
FIXING-
BOLT TO
MOVE
A
CLOSE-UP DETAIL: GUIDE FRAME
GUIDE-FRAME
BACK END
9
