9
Quality for Professionals
Professionals
5.8 Slider sensor (available as an accessory)
The servo motor shutter opens and closes automatically via the sensor when an
implement is lifted and lowered.
The sensor is connected at the 12-pin connector on the control module. The control
module detects the sensor automatically and opens/closes the servo motor shutter
via the sensor, as soon as the sensor has been connected.
TIP: The shutter can also be opened and closed manually (by pressing the
buttons).
For coupled tillage implements, the sensor can be installed on the chassis, because
the hoist is not being used.
In order to rotate the working position, the
button and
button must be
pressed at the same time.
This appears on the display:
Because most tillage machines are lifted and
lowered when in use, one option is to install
the sensor at or on the lever arm (see Fig.: 7
or 13) of the tractor.
TIP: The sensor can also be secured elsewhere as long as there is a mechanical
movement of more than 50 mm.
The distance between the sensor and the magnet should not exceed 2 cm.
Note: The slider only opens when the spreading disc is running!
Fig.: 7
Three-step signal
inverted!
