25
Quality for Professionals
Professionals
10 Maintenance and care
10.1 General instructions
To maintain the device in good condition after many hours of operation, please
always observe the following instructions:
Basic safety instructions for maintenance are included in the “For your
safety…” enclosure.
Original parts and accessories have been specially designed for the
machines or devices.
We draw express attention to the fact that original parts and accessories that
we have not delivered have not been checked and approved for use by us.
Under certain circumstances, the installation and/or use of such products
may negatively change or impact on the stipulated design characteristics of
your device. The manufacturer is not liable for damage caused by use of
non-original parts and accessories.
Unauthorised modifications, as well as the use of parts and attachments on
the machines, void the liability of the manufacturer.
Re-tighten all screw connections at the latest after 3 operating hours and
again after approx. 20 operating hours, and check them regularly thereafter.
(Loose screws may result in serious damage which is not covered by
warranty).
Paint damage may occur when cleaning at too high a pressure.
During winter, protect the device from rust using an environmentally-friendly
agent.
Park the device in a weather-proof area.
Do not use water to clean the device. We recommend using compressed air
to clean the device.
10.2 Location of the type plate
The type plate is located (viewed from the front) on the right-hand side in front of the
cover of the slide valve motor.
When asking questions or for
guarantee claims, please always
specify your machine's
product number.
Fig.: 12
