6
Quality for Professionals
5.2 Attaching to the tractor
For the type of attachment shown on the
left, screw the tractor drawbar between your
ES 100 M2 Special and the supplied
counter plate. You should use bolts with a
diameter of 10mm. Screw the top link
bracket to the top link plate and fix your
tractor's top link in place with the bolt.
5.3 Mounting on an attachment
When fitting the ES 100 M2
Special to an attachment, it is
best to use the counter plate. Use
this to secure your scattering unit
to a frame on the attachment.
Please ensure that the machine is
mounted at a height of approx.
one metre.
5.4 Fastening the control module
Using two screws, fasten the standard holder
(provided in the scope of delivery) in the cab. Store
excess cable in the driver's cab to avoid clamping
it.
Tip: Pay attention to the angle at which you view
the module to ensure optimum readability of the
display. You might have to bend the mount slightly
to set the correct angle.
Fig.: 3
Fig.: 1
Fig.: 2
Fig.: 4
