35
Quality for Professionals
Professionals
15.2
MX upper linkage hoist sensor (Art. No.: 00410-2-074)
Connection
12-pin connector on the control module
The ES 100 M2 Special shutter opens and closes automatically.
Cable length:
3000mm
Where installed: Because most tillage implements are
raised and lowered when being used,
it is best to install the sensor on the
tillage implement's three point. The
sensor
can
also
be
installed
elsewhere where there is mechanical
movement.
For
coupled
tillage
implements, the sensor can be
installed on the chassis because the
hoist is not being used here. For
coupled tillage implements, the sensor can be installed on the
chassis, because the hoist is not being used.
In order to rotate the working position, the
button and
button must be
pressed at the same time.
This appears on the display:
Scope of delivery: 1 sensor,
1 fastening plate incl. screws/bolts
Note: The slider only opens when the spreading disc is running!
Fig.: 16
Fig.: 17
Three-step signal
inverted!
