24
Quality for Professionals
Operating voltage
Not OK!
Device
Switches off!
Error
Slider-1!
Motor overloaded!
_
_
_
_
Motor not
connected!
Cable not OK!
Electronics not OK!
9 Controller messages
9.1 Notes
Display
Cause
Solution
Displayed if there is
insufficient operating
voltage or if fluctuations are
too great.
Minimise consumers;
Check battery; Check
cabling;
Check generator.
Shown during the shut-
down procedure.
Message disappears after
several seconds.
9.2 Fault(s)
Display
Cause
Solution
Is displayed if there is a
cable fault.
Check the cable(s) and
connector(s).
Is displayed if there is a
cable fault.
Check the cable(s) and
connector(s).
Displayed if the spreader
disc cannot turn.
Check whether objects
are obstructing or
weighing down the
agitator or the spreader
plate.
Is displayed if there is a
cable fault.
Check the cable(s) and
connector(s).
Displayed if the electronics
in the control module are
too hot.
Contact customer
service.
