APT 310XAC, Operation Manual

Page: 47 / 146

47
voltage value. Once you type in a number a shaded black box ( ) will begin
blinking acknowledging the parameter is being changed. Press the Enter soft
key to accept the parameter, or press the Esc key to move back to the V Hi-Lmt
or V Lo-Lmt parameter screen. When the Enter soft key is pressed the voltage is
accepted and you transition into the next system parameter: Frequency Limit.
If you wish to bypass editing this parameter and move to the next parameter you
can press the Prev or Next soft key.
4.3.9 Editing F Hi-Lmt & F Lo-Lmt (MANUAL Mode only)
Use the
∧
,
∨
soft keys to navigate to the F Hi-Lmt or F Lo-Lmt parameter (only
selectable for AC output). Pressing the Edit soft key will provide one of the
following screens:
F Hi-Lmt = indicates the frequency high limit that is programmed into the
instrument.
Frequency High Limit Range: indicates the frequency range that can be
programmed into the instrument.
F Lo-Lmt = indicates the frequency low limit that is programmed into the
instrument.
Frequency Lo Limit Range: indicates the frequency range that can be
programmed into the instrument
To change the frequency high limit or low limit use the numeric keypad and type