APT 310XAC, Operation Manual

Page: 111 / 146

111
RDB XX?
Read the selected Phase B results once a test has completed. Query only
available in AC Program mode and AC Manual mode.
RDC XX?
Read the selected Phase C results once a test has completed. Query only
available in AC Program mode and AC Manual mode.
RDE XX?
Read the selected total (Phase A + B + C) results once a test has completed.
Query only available in AC Program mode and AC Manual mode.
9.4.3 1 3W Queries
The following commands are used to query the instrument while in Parallel
mode.
COMMAND DESCRIPTION AC Program Mode
AC Manual
Mode
DC Program Mode
DC Manual
Mode
TDL1N?
Testing L1-N meter data
TDL2N?
Testing L1-N meter data
TDL1L2?
Testing L1-L2 meter data
RDL1N XX?
Results L1-N meter data
RDL2N XX?
Results L2-N meter data
RDL1L2 XX?
Results L1-L2 meter data
Memory, Step, Status,
Freq, Volt, Curr, Power,
APeak, PF, Q, CF, VA,
Timer Memory, Status,
Freq, Volt, Curr,
Power, APeak, PF,
Q, CF, VA
Memory, Step, Status,
Volt, Curr, Power, Timer Memory, Status,
Volt, Curr, Power
TDL1N?
Read the selected L1-N meter values while a test is in process.
TDL2N?
Read the selected L2-N meter values while a test is in process.
TDL1L2?
Read the selected total (L1-L2) meter values while a test is in process.
RDL 1N XX?
Read the selected L1-N results once a test has completed.
RDL 2N XX?
Read the selected L2-N results once a test has completed.
RDL 1L2 XX?
Read the total (L1-L2) results once a test has completed.