-
19
-
English
40
500
20
Road surface
Base plinth
600
Level
Electrical cable
conduits
30 mm
350
40
Installation
fig.4
5.2
FIXING THE BARRIER TO THE GROUND
HARRIER
must be mounted on a fl at, solid surface; therefore it is necessary to prepare a concrete base for it (
fi g.4
).
Warning
!
The base must be horizontal, do not use any other type of mounting.
PREPARING THE BARRIER SUPPORT MOUNTING AND BASE
Prepare a base plinth, complete with 2 fl exible cable
conduits (min. diameter 30 mm) for the electrical
cables.
IMPORTANT
: The plinth surface must be perfectly level,
and raised above ground level by 20 mm.
Sink four tie bolts, capable of securing the barrier
frame, into the concrete.
IMPORTANT
: the tie bolts must protrude by at least
40 mm.
Position the barrier frame, lining it up with the 4
bolts, and secure it in place using 4 nuts.
IMPORTANT
: Ensure that the barrier frame is mounted
horizontally, by adjusting the nuts and locknuts.
n.b.
:
An alignment plate,
complete with 4 tie
bolts, can be used for
this purpose (this is
an option and must be
purchased separately).
