APRILIA RSV mile, Use & Maintenance Book

Page: 40 / 160

40
use and maintenance RSV mille
! -
RSV mille R
!
MULTIFUNCTION COMPUTER
When the ignition key (1) is rotated to posi-
tion “
&
” (ON), the following warning lights
come on on the dashboard:
– red line warning light LED “
max ” (2).
– red engine oil pressure warning light
LED (
+
) (3), which remains on until the
engine starts.
The tachometer pointer (4) moves to the ma-
ximum rpm, set by the user.
After about three seconds have passed, the
red line warning light LED “
max ” (2) goes off;
and the tachometer pointer (4) returns to zero.
On the right side of the multifunction display,
the symbol “
efi
” (5) is displayed for about
three seconds.
This sequence of displays indicates that the
multifunction computer is operating properly.
After the first 600 mi (1,000 km) and there-
after every 4,650 mi (7,500 km), the word
“SERVICE” (5a) appears on the right dis-
play. When this occurs contact your Lo-
cal
aprilia Dealer, who will carry out the
operations indicated in the regular ser-
vice intervals chart, see p. 86 (REGULAR
SERVICE INTERVALS CHART).
To make the word “SERVICE” disap-
pear, press the “LAP” push button (6),
and simultaneously press the push but-
ton
A
and keeping them depressed for
about 5 seconds.
With the ignition key (1) in position
“
&
”
(ON) the standard settings on the dashbo-
ard are the following:
Right display : Clock (7), coolant tempera-
ture in °C (8).
Left display : Instantaneous speed in MPH
(9), trip 1 (trip odometer) (10), total miles
odometer (11).
Upon installation of the battery or of the
30A main fuses:
– the tachometer pointer (4) makes 12
clockwise clicks, thus checking the ope-
ration of the tachometer itself;
– the instantaneous, maximum and avera-
ge speed function is set in “ MPH ”;
– the coolant temperature is set in °C;
– the digital clock is set to zero;
– the red line is set at 6000 rpm, indicated
by the illumination of the red line war-
ning light LED “
max ” (red) (2).
NOTE
If necessary, carry out the appro-
priate adjustments.
SEGMENT OPERATION CHECK
◆
Press the push buttons
B
and
C
simul-
taneously.
◆
Rotate the ignition key (1) from position
“
#
” (OFF) to position “
&
” (ON).
All the segments (13) (13a) will remain on
until the push buttons
B
and
C
are relea-
sed.
SWITCHING FROM mi TO km (from MPH
to km/h) AND VICEVERSA (LEFT DI-
SPLAY)
km/h MPH
km
mi
AVS V max
12
9
10
11
13a
SERVICE DIAG V BATT
13 7
5
8
5a