APRILIA RSV mile, Use & Maintenance Book

Page: 38 / 160

38
use and maintenance RSV mille
! -
RSV mille R
!
INSTRUMENTS AND INDICATORS TABLE
Description Function
Directional indicator
(
Flashes when the right (or the left) direction indicator is on.
High beam indicator
#
Comes on when the headlight is in “high beam” position or when the high beam signalling is operated.
Tachometer rpm
It indicates the number of revolutions of the engine per minute.
Never exceed the maximum engine speed, see p. 80 (RUNNING-IN).
Programmable red line
warning light LED
max
It flashes when the max. rpm set by the user is reached, see p. 42 [SETTING THE RED LINE THRESHOLD
(WITH ENGINE OFF ONLY)].
It comes on when the engine max. rpm threshold setting is confirmed, see p. 42 [SETTING THE RED LINE
THRESHOLD (WITH ENGINE OFF ONLY)] and whenever the ignition key is rotated to position “
&
” (ON),
for about three seconds, see p. 40 (MULTIFUNCTION COMPUTER).
Low fuel warning light
)
It comes on when the quantity of fuel left in the tank is about 1.19 ± 0.26 US gal (4.5 ± 1
!
). In this case, top
up as soon as possible, see p. 54 (FUEL).
Side stand down
warning light
\
Comes on when the side stand is extended.
Engine oil pressure
warning light LED
+
It comes on whenever the ignition switch is turned to position “
&
” (ON) and the engine is not running, thus
testing the correct operation of the light LED. If during this phase the light LED does not turn on, contact your
Local
aprilia
Dealer. The engine oil pressure warning light LED “
+
”
,
must go off when the engine is run-
ning.
If the engine oil pressure warning light LED “
+
” remains on after the engine
has started, or if it comes on while you are riding your vehicle, this means that
the oil system is not developing sufficient pressure. In this case, immediately stop the engine and
contact your Local
aprilia Dealer . Failure to heed this warning can lead to engine seizure, upset,
and serious injury or even death.
Neutral indicator
warning light
*
It comes on when the transmission is in neutral.
Multifunc-
tion digital
display
(left side)
Speedometer
(MPH – km/h) Indicates the instantaneous, average or maximum road speed [in miles (or kilometers)] accor-
ding to the presetting, see p. 40 (MULTIFUNCTION COMPUTER). To alternate
the data di-
splayed, see
p. 40 (MUL-
TIFUNC-
TION COM-
PUTER).
Odometer
(mi – km)
Indicates the total number of miles (or kilometer) that the vehicle has traveled since new.