APRILIA RSV mile, Use & Maintenance Book

Page: 43 / 160

43
use and maintenance RSV mille
!
-
RSV mille R
!
MULTIFUNCTION (RIGHT DISPLAY)
The right display (multifunction) includes
the coolant temperature in °C (Celsius de-
gree) (8) and the digital clock (7) as stan-
dard settings.
NOTE
When the engine is cold, the
word “
.
” flashes.
By pressing the push button
E
, the fol-
lowing functions can be obtained in se-
quence:
STANDARD SETTING:
COOLANT TEMPERATURE
AND DIGITAL CLOCK
The coolant temperature value (8) is
shown in the upper part of the right display.
It is possible to switch from °C (Celsius de-
gree) to °F (Fahrenheit degree) and vice-
versa, see p. 44 (SETTING °C (Celsius de-
gree) OR °F (Fahrenheit degree)).
– When the temperature is below 35°C
(95°F), the word “
.
” (8) flashes on
the right display.
– When the temperature is over 115°C
(239°F), the value (8) flashes on the right
display, even if a function different from
the standard setting has been set.
– When the temperature is over 130°C
(266°F), the symbol “
LLL
” (8) appears on
the right display.
If the symbol “
LLL
” is displayed with a
temperature below 130°C (266°F), there
may be a failure of the electric circuit. In
this case, contact your Local
aprilia De-
aler.
Thermometer range on the display:
35 – 130°C (95 – 266 °F).
The digital clock (7) appears in the lower
part of the right display.
To set or modify hour and minutes, see
p. 44 (SETTING THE HOUR) and p. 44
(SETTING THE MINUTES).
BATTERY VOLTAGE - V BATT
◆
If the push button
E
is pressed once, the
battery voltage expressed in volts (19)
appears in the lower part of the right di-
splay, while the coolant temperature (8)
is displayed in the upper part.
The word “
V BATT ” (20) is displayed.
The charging circuit is functioning cor-
rectly if at 4,000 rpm the battery voltage
with low beam “
F
” on is included
between 13 and 15 V.
Standard setting:
temperature in °C (Celsius degree)
and digital clock
E
Battery voltage (V BATT)
E
Hour setting
E
Minute setting
E
°C (Celsius degree) or °F (Fahrenheit
degree) setting
SERVICE DIAG V BATT
8
7
SERVICE DIAG V BATT
19
20