APRILIA PEGASO 650 IE - 2003 Manual Download | Manualshive

Page: 47 / 112

background image

47

use and maintenance

Pegaso 650 I.E.

$%0!2452% !.$ $2)6%

a

WARNING

Do not position any object inside the
front part of the fairing (between the han-
dlebar and the dashboard), in order not
to hinder the rotation of the handlebar
and visibility toward the dashboard.

NOTE

Before departure, carefully read

the “safe drive” chapter, see p. 5 (SAFE
DRIVE).

a

CAUTION

If the low fuel warning light “

-

” (1) posi-

tioned on the dashboard comes on
while the vehicle is running, this means
that 5

L

of fuel are still available in the

tank.
Provide for topping up as soon as pos-
sible, see p. 27 (FUEL).

a

WARNING

If  you  drive  without  passenger,  make
sure  that  the  passenger  footrests  are
folded.
While  riding,  keep  your  hands  on  the
grips and your feet on the footrests.

NEVER RIDE IN ANY POSITION OTHER
THAN THOSE INDICATED.

a

WARNING

If you drive with a passenger, instruct
him/her so that he/she does not create
problems during manouvres.

Before leaving, make sure that the
stand is completely up.

To leave:

◆

Start the engine, see p. 44 (STARTING).

◆

Adjust the inclination of the rear-view
mirrors correctly, see p. 83 (REAR-VIEW
MIRRORS).

a

CAUTION

With  the  vehicle  at  rest,  try  to  get  ac-
quainted  with  the use of the  rear-view
mirrors.  The reflecting surface  is con-
vex,  therefore the  objects  seem  to  be
farther  away  than  they  actually  are.
These mirrors offer a “wide-angle” view
and  only  experience  will  allow  you  to
evaluate the distance  of the  following
vehicles correctly.

◆

With released throttle grip (2) (

Pos.A

)

and engine idling, pull the clutch lever (3)
completely.

◆

Engage the first gear, by pushing the
gear lever (4) downwards.

◆

Release the brake lever (pulled on the
starting).

«
...
45
46
47
48
49
...
»

Summary of Contents for PEGASO 650 IE - 2003

















































































































Reviews:

No comments

Related manuals for PEGASO 650 IE - 2003

Brand: B-PWR Pages: 12

Brand: Honda Pages: 100

Dirt Runner 90cc

Brand: Baja motorsports Pages: 66

Brand: R&G Pages: 24

SPORTCITY CUBE 125

Brand: APRILIA Pages: 157

Brand: Takegawa Pages: 2

Brand: hepco & becker Pages: 4

Brand: MRA Pages: 6

Brand: Suzuki Pages: 101

Brand: Silvercrest Pages: 42

Brand: VESPA Pages: 308

Brand: Dynafit Pages: 21

Brand: Scott Safety Pages: 67

Brand: Datatool Pages: 5

Brand: Sealey Pages: 2

Brand: Benelli Pages: 39

Brand: Benelli Pages: 64

Brand: Beta Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands