APRILIA PEGASO 650 IE - 2003, Manual

Page: 18 / 112

18
use and maintenance Pegaso 650 I.E.
-!). ).$%0%.$%.4 #/.42/,3
#/.42/,3 /. 4(% ,%&4 0!24 /& 4(%
(!.$,%"!2
NOTE
The electrical parts work only when the ignition switch
is in position “
2
”.
1) HORN PUSH BUTTON (
*
)
The horn is activated when the push button is pressed.
2) DIRECTION INDICATOR SWITCH (
6
)
To indicate the turn to the left, move the switch to the left; to
indicate the turn to the right, move the switch to the right.
To turn off the direction indicator, press the switch.
3) DIMMER SWITCH (
8
-
7
)
When the light switch is in position “
(
”: if the dimmer switch
is in position “
7
”, the high beam comes on; while if it is in po-
sition “
8
”, the low beam comes on.
3) DIMMER SWITCH (
8
-
7
)
e
When it is in position “
8
” the parking lights, the dashboard
light and the low beam are always on.
When it is in position “
7
”, the high beam comes on.
4) HIGH BEAM SIGNALLING PUSH BUTTON (
7
)
It makes it possible to use the high beam for signalling to
forthcoming vehicles while overtaking and in case of peril
and/or emergency.
The high beam blinking is operated by pressing the push but-
ton, independently of the position of the light switch (
(
-
'
-
•
).
NOTE
To disconnect the high beam blinking, release the push
button.
5) COLD START LEVER (
0
)
The starter for the cold start of the engine is operated by ro-
tating the lever “
0
” downwards.
To disconnect the starter, move the lever “
0
” to its initial posi-
tion.