APRILIA PEGASO 650 IE - 2003, Manual

Page: 26 / 112

26
use and maintenance Pegaso 650 I.E.
2% !2 # ! 3% m SUP PLI ED AS
ST ANDA RD E QUI PME NT IN T HE
COUNTRIES WHERE REQUIRED
Thanks to the use of the rear case, you no
longer have to carry the crash helmet or
other bulky objects with you every time you
park the vehicle.
NOTE
Write down your personal data
on the appropriate plate positioned on the
lock.
Clean and lubricate the coupling lock on
the lower part of the case every 6000 km
(3750 mi) or 12 months.
NOTE
If the rear case is not installed on
the vehicle, before using it, it is necessary
to install the appropriate supports, see p.
76 [INSTALLING THE REAR CASE SUP-
PORTS
m
(supplied as standard equip-
ment in the countries where required)].
To open the rear case, proceed as fol-
lows:
◆
Position the vehicle on the stand, see p.
52 (POSITIONING THE VEHICLE ON
THE STAND).
◆
Introduce the key (1) in the lock.
◆
Rotate the key (1) clockwise.
◆
Remove the handle (2).
◆
Lift the lock (3).
◆
Release the upper part (4) of the lock (3)
from the case (5).
◆
Lift the upper part of the case to open it
(5).
NOTE
The case can contain two
“CRASH” helmets.
Two keys are supplied together with the
vehicle (one spare key).
NOTE
Do not keep the spare key on the
vehicle.
a
WARNING
Do not load the rear case excessively.
Maximum allowed weight: 5 kg.
To remove the rear case, proceed as fol-
lows:
◆
Introduce the key (1) in the lock.
◆
Rotate the key (1) clockwise.
◆
Extract the handle (2) and grasp it firmly
with one hand.
◆
Press the appropriate push button (6).
◆
Lift the case (7) and withdraw it from the
relevant front couplings.
a
CAUTION
Handle the plastic and painted compo-
nents with care to avoid scraping or
damaging them.
a
WARNING
Upon reassembly, make sure that the
case is properly anchored to its sup-
port.
Front part: perfect fitting of the support
coupling elements into the seats pro-
vided on the case;
Rear part: perfect fitting of the support
coupling pin in the relevant lock on the
case; when the lock snaps, the coupling
is correct.