APRILIA PEGASO 650 IE - 2003, Manual

Page: 19 / 112

19 use and maintenance Pegaso 650 I.E.
#/.42/,3 /. 4(% 2)'(4 0!24 /& 4(%
(!.$,%"!2
NOTE
The electrical parts work only when the ignition switch
is in position “
2
”.
1) ENGINE STOP SWITCH (
2
-
1
)
a
WARNING
Do not operate the engine stop switch “
2
-
1
” in running
conditions.
This is a safety or emergency switch.
With the switch pressed in position “
2
”, it is possible to start
the engine; when the switch is pressed to position “
1
”, the
engine stops.
a
CAUTION
With stopped engine and ignition switch in position “
2
”, the
battery may discharge.
When the vehicle has come to rest, after stopping the en-
gine, move the ignition switch to position “
1
”.
2) LIGHT SWITCH (
(
-
'
-
•
) (not provided for
e
)
When the light switch is in position “
•
”, the lights are off; when
the switch is in position “
'
”, the parking lights and the dash-
board light are on; when the switch is in position “
(
”, the
parking lights, the dashboard light and the low beam are on.
The high beam can be operated by means of the dimmer
switch.
3) START PUSH BUTTON (
+
)
When the start push button “
+
” is pressed, the starter makes
the engine run. For the starting, see p. 44 (STARTING).