HUMIDISTAT SET-Up
Humidistats are controlled using the
Humidistats page . The Prior and Next
buttons are used to navigate through all the
humidistats on the network .
The Humidity field displays the controlling
humidity value for the humidistat .
Equipment Mode can be used to select
between Off, Humidify, Dehumidify or
Auto . In Auto mode the humidistat
will control humidity through both
humidification and dehumidification .
The Equipment Status will indicate if
the equipment is off, humidifying or
dehumidifying .
The Humidifier Set Point field is used to set
the humidifier control set point .
The Dehumidifier Set Point field is used to
set the dehumidifier control set point .
THERMOSTAT SET-Up
Thermostats are controlled using the
Thermostats page . The Prior and Next
buttons are used to navigate through all the
thermostats on the network .
The Temperature field displays the controlling
temperature value for the thermostat .
The HVAC Mode field is used to control the
HVAC mode of operation . The options are
Off, Cool, Heat, Auto, and Em Ht . In
Auto mode the thermostat will control
both heating and cooling . In Em Ht
the thermostat will control heating
with Auxiliary Heat only . Note: options may
be limited based on equipment type . The
HVAC status will indicate if the equipment is
heating, cooling or off .
The Fan Mode field is used to control the
Fan mode of operation . The options are
Auto, On and Circ . Note that Circ operates
similarly to Auto, but guarantees 20 minutes
of fan run time every hour . The Fan Status
field indicates whether the fan is on or off .
15
