Apricot XEN Pentium 60, Owner'S Handbook Manual, Page: 99 / 139

XEN OWNER'S HANDBOOK 7/5
Troubleshooting
Chapter 7
Note that, within a chart, the possible diagnoses of a problem
are listed in order of decreasing likelihood.
Remedy
Switch on the supply at the AC power outlet.
Push the plugs in firmly at the AC power outlet and at the XEN power inlet.
This may be caused by a AC power surge, but is more often a symptom
of problems with the XEN or its peripherals.
Switch the computer off and disconnect the AC power supply. Unplug all
peripherals. Try to discover the cause of the fault. Replace the blown
fuse with one of the same rating and try again.
If the replacement fuse blows, call an authorized Apricot maintainer. If the
replacement fuse does not blow, switch off, reconnect a peripheral and
switch on. Repeat this procedure for each peripheral in turn.
If power is lost when you deliberately flex the cable, replace the cord
with an identical one obtained from your Apricot supplier or an
authorized Apricot maintainer.
The power-on LED should be lit while the XEN is plugged into a
working AC power supply and switched on. Call an authorized
Apricot maintainer.
Ensure that all cables and cords are tightly connected to the system unit
and any peripherals.