Apricot XEN Pentium 60, Owner'S Handbook Manual

Page: 63 / 139

XEN OWNER'S HANDBOOK 5/3
Upgrading the Apricot XEN
Chapter 5
Expansion cards are a relatively cheap way of upgrading your
system. Moreover, they are usually quite easy to install, requiring
no more than a cross-head screwdriver and a steady hand.
Installation Installation of an expansion card in the XEN is a simple process
requiring the removal of only the system unit cover and a
blanking plate. The following instructions and illustrations
describe how to install a card in a simple step-by-step sequence.
1. Power the system down.
2. Take suitable anti-static precautions and remove the
system unit cover.
If you are unfamiliar with Apricot’s recommended anti-
static precautions and/or the process of removing the
system unit cover refer to the appendices at the rear
of this manual.
3. With the system unit cover removed, the space for
expansion cards will be visible. It is on the left side of
the system unit behind the activity indicators. Use the
illustration below to help you identify this area.
BLANKING PLATES CARD GUIDES
EXPANSION CARD
CONNECTORS
At the rear of the area are three metal blanking plates,
one for each expansion card slot. These plates cover
slots in the rear of the system unit which will be used
by expansion cards.
At the front of the area are three guides. These ensure
that the front edge of any full length card is secured.