XEN OWNER'S HANDBOOK
5/15
Upgrading the Apricot XEN
Chapter 5
6.
Break the blanking plate out by bending it backwards
and returning it to the vertical several times.
7.
Remove the drive from its packaging. With the drive
there should be four screws and a signal cable. Some
drives may be supplied with additional items.
8.
If necessary configure the drive. Drives supplied by
Apricot will be correctly configured for installation in
a XEN.
For information on how Apricot-supplied drives are
configured see the drive specific information following
these installation instructions.
9.
Identify the top and bottom of the drive.
10. Rest the drive, top down, on a suitable anti-static surface.
11. With the drive bay upside-down place it over the drive.
The front of the drive must be at the end where the
blanking plate was fitted.
12. Line up the holes in the underside of the drive with
those in the base of the drive bay.
COMPACT
SECURING
SCREW
HOLES
Summary of Contents for XEN Pentium 60
