66
5-2-2020
APQS.com
Daily Maintenance
Between each quilting project (or sooner if necessary)
:
Place a small rag or paper towel on the carriage under the hook area to catch excess oil and lint. Remove
the bobbin case and unthread the machine from the front, past the take-up lever.
Working from the front side of the machine, brush lint from the hook and hook area (or use compressed air).
Check to make sure that the rag is out of the way of the hook assembly.
Since your machine ‘defaults’ to stitch regulated mode at power up, you’ll need to press the Stitch
Regulator button on your front cover to be able to use manual mode. Then, press the “Less Stitches”
button to slow the speed to around 8. Now start the machine in manual mode pushing the toggle switch
away from the white dot on any handle.
Paper towels laid over carriage
Pull thread from needle
back through this guide
Millie Controls
Freddie Controls
Press Stitch Regulator Button
to engage Manual Mode
Press and hold Less Stitches
button until speed set around 8
