26
8-1-2021
APQS.com
Lenni – Lucey Oparation
6.
Double check that the “rail
guard” on the axle faces
the carriage front.
5.
Place the Bliss rear carriage
axle over the rear mounting
holes. Make sure the jack
faces the rear of the carriage.
4.
Tighten the mounting
screws securely with a 3/16”
allen wrench.
1.
Remove the rubber packing
sleeves from the axle bolts.
At the rear of the carriage, locate
the two “inner” set of holes and
start bolts by hand.
Tighten the mounting screws
securely with a 3/16" allen
wrench.