Appro LC-7224EP, Installation & Operation Manual

Page: 57 / 111

Change the Application Setting —Motion Detection.
Please follow the steps below to enable changes in the motion detection function of the alarm
tion button on the left side of the Alarm to enter the “Motion Detection”
page.
through the network if necessary.
Set the motion detection:
1. Click the Motion Detec
2. Click and drag the left mouse button across a targeted zone to draw a red rectangle on the
one targeted zone depending on your requirement.
menu. After setting the target zone, please click
. Set up the sensitivity.
ubmit the new setting of the recording.
image (coordinates provided below).
NOTE: You can set more than
3. Click the right mouse button to see the popup-
“Save setting”.
4. Enables / disables the motion detection function.
5
6. Click the Submit button to s
7. Click the Home button to return to the home page.
Description of function keys:
The targeted zone: Click and drag the mouse across the targeted zone to draw a red rectangle
on the image.
gle’s coord Detection Range: The red rectan inates.
Motion Detection: This option en disables the motion detection function.
n options for the setup signal level or just
type in the value of Customized Threshold.
Save: Click to save the motion detection range.
ables /
Sensitivity Level: You can select any one of the give
55