Apollo RoadRunner MRH16 Operating Manual Download Page 43

Page: 43 / 69

Mobile Digital Video Recorder

NOTE: For the Notify action, the notify item you select should be enabled in the Notification setup screen and

the DVR should be registered in the RAS (Remote Administration System).

Select the desired box under the

PTZ

heading, and a list of PTZ presets appears. Select the preset position for each PTZ

camera, where you want PTZ cameras to move to when the DVR detects video blind on the selected camera’s input.

Text-In

PATH: Event menu > Text-In > Settings tab

Figure 49 — Text-In Settings screen.

The DVR can be set to react to text input from devices such
as ATMs (Automated Teller Machines) and POS (Point of
Sale; i.e., cash registers). This screen allows you to configure
the DVR for each text-in device.

Select the box under the

Setup

heading. Selecting the

Setup

heading changes all the parameters excluding Port settings
of all the text input channels.

NOTE: The system performance might be affected when

a large quantity of text inputs are detected from
several channels at the same time.

Figure 50 — Text-In Device screen.

Select the box beside

Port

, and select from None, RS232 1,

RS232 2, RS485 and USB-Serial (1~8).

NOTE: When If you have set the Port as None, you will not

be able to make any changes to the screen.

NOTE:

A When using the USB to serial text-in device, do

NOT remove the USB cable from the port while the
system is running.

Select

Setup…

and configure RS232 1, RS232 2, RS485 or

USB-Serial ports by using the ATM or POS manufacturer’s
recommended settings.

Select the box beside

Text-In Product

, and select your device from the list.

NOTE: The following description is for a Generic Text Device. The screen changes for different types of text

input devices, and there will be different parameter boxes for you to enter information.

Select the box beside

Transaction Start

, and enter the Transaction Start string by using the virtual keyboard. Refer

to the device manufacturer’s documentation for the text string that the device first sends when a transaction starts.

If you want the DVR to react to any character sent from the text input device, you will want to turn On

Any Character.

Select

Any Character

to toggle between On and Off.

NOTE: If

Any Character is turned On, you will not be able to enter any text in the Transaction Start box.

Select the box beside

Transaction End

, and enter the Transaction End string by using the virtual keyboard to. Refer

to the device manufacturer’s documentation for the text string that the device sends when a transaction ends.

Select the

more line(s)

box, and select the number of additional lines of text that you want the DVR to record. You

can choose from 0 to 10.

Select the box beside

Line Delimiter

, and enter the character(s) that the device uses to indicate the end of a line by

using the virtual keyboard to. Special characters can be created using ^ and a capital letter; e.g., ^J for NL (New Line),
^M for CR (Carriage Return). Refer to the device manufacturer’s documentation for Line Delimiter character(s).