Apollo RoadRunner MRH16, Operating Manual

Page: 24 / 69

Operating Manual
16
PATH: System menu > Storage > Setup tab
Figure 14 — Storage Setup screen.
Selecting
Auto Format
toggles between On and Off. When
set to On, the internal hard disk drive will be formatted
automatically when the system boots if the internal hard disk
drive is not formatted or used for another DVR (except of the
same model).
User
PATH: System menu > User
The User screen displays the authorized groups and users, and you can add and delete groups and users. When adding
a group, you can assign authority levels to the group.
Figure 15 — User setup screen.
The
+/-
column is used to collapse and expand user groups.
If there is a + or – in this column, it indicates the item is a
Group Name. If there is a – in front of the Group Name, it
indicates that the group has been “expanded” and all of the
User Names within that group are displayed below the Group
Name. If there is a + in front of the Group Name, it indicates
that the group has been “collapsed” and all of the User Names
within that group are hidden. To collapse or expand a group,
select the
+/-
column in front of the desired group.
Selecting a Group Name allows you to change the authority
levels assigned to the group.
CAUTION: Write down the new password and save it in a secure place. If the password is forgotten,
the unit must be reset using the Factory Reset Button and all data settings will be lost.
Selecting a User Name allows you to add or change the password assigned to that user. You can also change the group
to which the user is assigned.
The column can be used to delete a User Name or an entire Group. If the is grayed out, that Group or User cannot
be deleted. Select the , and you will be asked to confirm that you want to delete the User or Group. To delete the
User currently logged into the DVR on a local system or a PC running RAS, log the user out of the system first and
then delete the user.
To add a Group, select the
+ Group…
box. A virtual keyboard appears allowing you to enter the Group name. You
can use up to 15 characters including spaces in the group name. Enter the name and assign authority levels to the group.