Apollo RoadRunner MRH16, Operating Manual

Page: 27 / 69

Mobile Digital Video Recorder
19
PATH: Network menu > Network > LAN tab
Figure 20 — LAN (Manual) setup screen.
Select the box beside
Type
, and select the type of network
configuration from:
Manual
,
DHCP
and
ADSL (with
PPPoE)
.
Selecting
Manual
from the Type allows you to set up LAN
parameters manually.
Change the numbers by selecting them and using the Up and
Down arrows to increase or decrease the number. The factory
default LAN settings are:
IP Address: 192.168.1.129
Gateway: 192.168.1.254
Subnet Mask: 255.255.255.0
NOTE: You will need to get the appropriate IP Address, Gateway and Subnet Mask from your network
administrator.
Select the box beside
DNS Server
. Use the Up and Down arrows to set the IP address of the DNS server.
Select the
Port Number Setup…
box, and the
Port Number Setup
screen appears.
NOTE: You will need to get the appropriate Port Numbers for each RAS related program (Admin, Callback, Watch,
Search and Audio) from your network administrator.
Change the numbers by selecting them and using the Up and Down arrows to
increase or decrease the number. The factory default Port settings are:
Remote Admin: 8200
Remote Callback: 8201
Remote Watch: 8016
Remote Search: 10019
Remote Audio: 8116
NOTE: The system restarts automatically after changing the port settings.
Do NOT use the same port number for two different programs, otherwise, the DVR cannot be connected
with the PC running RAS.
CAUTION: When changing the port settings, you must change the port settings on the PC running
RAS as well. Refer to the RAS manual for details.
Selecting
DHCP
from the Type and selecting
Save
button
reads the current IP address of the DVR configured by DHCP
(Dynamic Host Configuration Protocol) network.